Follow RVR_Ireland on Twitter

 

 

A natural gas or LPG fired gas boiler solution is easily designed for any commercial building. The high efficiency condensing boilers from the PROCON range are ideal building blocks for any system in the capacity range from 45kW to 900kW.

These products are manufactured by MHG Heiztechnik, one of Germany's leading producers of high efficiency heating products. MHG were previously the heating division of MAN, the well known industrial conglomerate famed for the manufacture of trucks and marine diesel engines. The heating division of MAN became a separate company in 2005, based in the town of Buchholz near Hamburg.

Product Range

There are four basic boilers in the PROCON commercial range. All boilers have certain features in common.

  • High Efficiency
  • Modulating pre-mix burner
  • High Quality 316 Stainless Steel Heat Exchanger
  • Low Noise
  • Space Saving
  • Modern design

PROCON 45

PROCON 45 - Wall mounting boiler
PROCON 45 - Wall mounting boiler
The Procon 45 is suited to applications with a heat load of up to 47kW. It will automatically modulate it's output to match loads as low as 12.9kW. For more detailed specification information, visit the catalogue page.

It can be installed either singly or in cascade installations of several boilers.

PROCON 75

PROCON 75 - Wall mounting boiler
PROCON 75 - Wall mounting boiler
The Procon 75 can provide a heat output of up to 75kW. It will automatically modulate it's output to match loads as low as 16kW. For more detailed specification information, visit the catalogue page.

It can be installed either singly or in cascades of up to 900kW. A cascade installation of five PROCON 75 boilers will cater for a load of up to 375kW. The maximum cascade size is 12 boilers or 900kW.

There are two versions of the PROCON 75, the cascade version and the standard version.

A cascade design is very easily implemented. One simply selects one cascade model and as many standard models (up to 12 boilers in total)as are needed. The controls for the cascade are contained in the cascade model and all boilers in the cascade are linked in a daisy chain wiring arrangement using a 2 core cable.

PROCON HT150 and PROCON HT225

PROCON HT225 - Floor mounting boiler
PROCON HT225 - Floor mounting boiler
PROCON HT225 - showing internal modules
PROCON HT225 - showing internal modules
The PROCON HT are floor standing boilers which are available in two output capacities, 150kW and 225kW. These boilers use the same burner and heat exchangers as the PROCON 75 model. The PROCON HT150 has two 75kW modules and the PROCON HT225 has three 75kW modules.

For more detailed specification information, visit the PROCON HT150 catalogue page or the PROCON HT225 catalogue page.

Because the boilers are based on a 75kW module, they can modulate their output between 16kW and their maximum output capacities.

There are two versions of the HT models, the cascade version and the standard version.

A cascade design is very easily implemented. One simply selects one cascade model and as many standard boilers (up to 12 modules in total)as are needed. The controls for the cascade are contained in the cascade model and all boilers in the cascade are linked in a daisy chain wiring arrangement using a 2 core cable.

A maximum of 6 PROCON HT150 or 4 PROCON HT225 boilers may be used in a single cascade installation. The boiler models may be mixed if required.