Follow RVR_Ireland on Twitter

 

 

The standard PROCON HT models have an in-built low velocity header. This means that heating and hot water zones can be maintained and pumped independently and the boiler will automatically modulate its' output as required.

Dimensions and Location

The boiler should be installed in a dry indoor location where there is sufficent space to accomodate the boiler and provide the clearances needed for maintainance.

External dimensions of PROCON 150/225 boiler
External dimensions of PROCON 150/225 boiler

For ease of installation,commissioning,servicing and mantainance the following clearances should be observed

  • Above the boilers 750mm minimum
  • Beside the boilers 500mm minimum
  • In front of the boilers 1000mm minimum
  • Behind the boilers 1000mm minimum

Hydraulic Circuit

Plumbing of single wall mounted PROCON boiler
Plumbing of single wall mounted PROCON boiler

Wiring

Plumbing of single wall mounted PROCON boiler
Plumbing of single wall mounted PROCON boiler

Electrical Connections

Plumbing of single wall mounted PROCON boiler
Plumbing of single wall mounted PROCON boiler

Further Information